CNC lathe detection -3 kinds of location detection methods detailed introduction

The use of CNC lathes will ultimately test this link, either before or after the use of the lathe need to be on the detection of such links, which is to make the product in the course of the key to have a better effect, if In the daily routine is not good at the detection of related parts, then in the actual use of the process there will be problems, such as the most common problems of the product processing, with the lack of accuracy led to the processing of the product can not be used normally, then at CNC lathe position detection process in several ways? In general, there are 3 ways is the most common.

CNC lathes for the detection of the three main methods used are displacement detection methods, speed detection methods, and current detection methods, the three most basic detection methods basically cover a wide range of lathe detection, although in detail there are Many different, but in terms of details there is not much difference.

    However, the methods and methods that can be used in the actual operation process can also be specifically divided into three kinds, and the first is the digital and analog form detection. This is a way of dividing the test software category. In which case is it better to use which kind of test? This depends on the actual measurement process selected in the testing process and how the route, the second way for incremental and absolute detection. In this testing process must find a fixed reference point on the machine, if you can not find a reference point in advance so that the detection method does not have any effect, and the third for the rotation and linear. Some people in the industry also called this detection method is indirect detection method.

    CNC lathe manufacturers to produce products for testing, categories and methods are mainly described above, in the refinement of the division there are a dozen different ways for the application, but overall, as long as the basic way to be able to do Of the master, then we can do a good job of testing of such equipment, in general, large enterprises in the testing done when done is very perfect, because there are professional and technical personnel to carry out maintenance, testing, such maintenance testing data The benefits are very much, not only to make the product in the process of parts processing has a better accuracy performance, it is particularly important to allow the machine has a longer useful life, different from other types of machinery and equipment, machine tools that As long as the equipment is not particularly severe in terms of physical damage, it can be used almost continuously, albeit technically, may lag behind. However, by mastering the skills of the control personnel, still can make up for the lack of relatively backward technology, the simplest case is in the digital control equipment in power today, there are still many enterprises using traditional machine tools for product processing, although the processed products Relatively speaking, the requirements for numerical parameters are not very high. The range of products used in daily life is very wide. However, many CNC lathes can be manufactured by some manual lathes. The lathe is capable of Use a very long period of time, to do a good job of testing and daily maintenance is critical, so that you can save unnecessary costs.