CNC machine tool failure how to quickly repair

Once the CNC lathe failure, you want to solve the problem will be quickly repaired, can find the problem lies in whether the problem can be solved quickly, in the face of the machine can not be used, we must first of the machine tool For the overall view. Look at what part of the failure occurred, and then targeted to solve the problem. This maintenance efficiency can be more excellent.

    What is CNC lathe? Is a combination of automated machine tools and computers technology products, with the precision measurement capabilities and product processing capabilities together, this device has the characteristics of the production of parts and efficient products, compared with the traditional lathe, the traditional Lathe heavy and not repeatable operability, so the performance of modern CNC products in the performance is extremely outstanding, the more sophisticated the product, the probability of failure will be higher, and the traditional lathe products compared to CNC products The probability of problems than traditional products about 40% higher, first of all we have to look at the appearance of the lathe to understand the first-hand information, detailed analysis to eliminate the problem. After the overall view of the color to see if there is a smell, if there is odor produced is to explain CNC lathe manufacturers products, electric shock during intense friction electric burned, in which case there will be odor, such as the smell of scorched, If the faulty lathe ozone smell then it shows that it has a discharge phenomenon, this time to immediately cut off its power, the internal line to find, find the problem immediately after the line maintenance to solve the problem.

    Found in the 6150 CNC lathe problems, even if you have found a local location and do not blind maintenance, we must first ask the operator, under normal circumstances as a result of misuse caused the probability of machine problems more than 40%, we can say This is one of the reasons for the most troubles, and ask the operators to understand what happens in the event of a malfunction, such as an abnormal noise or a logic fault in the lathe, and then analyze and judge according to these actual conditions so that it can In ensuring to find a local location after the exact judgment of the specific problems in which part, to facilitate rapid maintenance.

    In the maintenance process according to this step to do, we must first check the system parameters to ensure that there is no problem in the system parameters, and then check the other parts, such as lathe stop working after 500 or 501 alarm , Which led to the lathe does not work, after the system inspection, we should adopt a variety of ways to check, under normal circumstances CNC lathe is not working because of its system has failed, once such problems can be cut off after the power Restart, this will be able to troubleshoot out. The use of these methods still found after the failure of the lathe problems, so most of the problems in the line, in which case we must completely remove the lathe, the details of the fault repair, usually due to physical damage or Is a leakage problem caused by the relatively serious fault, under which the damage is accompanied by accessories is related to the full range of testing should be to avoid the problem of enlargement, the hidden danger of the most likely to damage the lathe.