CNC grinder routine maintenance and vibration solution

Grinder daily care what it, Jun Rui finishing the following 8:00:

1. Do not use the fan on the workbench blowing, to prevent the dust iron filings into the rail, affecting rail accuracy and feel. The company is located in:

2. Grinder guide lubricants use professional lubricants, generally 32 # rail oil is appropriate. The company is located in:

3. Regularly check the grinder table cable is loose, locking to prevent fracture or affect the accuracy of the touch. The company is located in:

4. Grinder guide rail oil should be replaced and added in a timely manner, the general look at the oil if the oil cloudy or black to be replaced, the time to control replacement in 3-6 months, the first three months, after 6 months for a change. The company is located in:

5. If it is semi-automatic grinding machine weekly inspection grinding fluid concentration and timely replacement.

6. If it is a manual grinder to regularly check the cable tightness

7. Regularly check whether the fuselage in the work is not stable, whether the level.

8. Regularly clean the workbench guide rail to prevent iron filings from damaging the guide rail surface, thus affecting the accuracy of the guide rail. Clean the available gasoline taping cloth and wipe it cleanly. For the embedded debris, gently remove it with a blade. The above actions should be carried out under the guidance of professionals or grinder factory master processing.

9. daily work is completed using brush to make the body to clean the grinder. Prohibit the use of air guns on the countertop or guide straight blow to prevent iron filings into the rail, affecting the accuracy of the grinder. The company is located in:

Grinder vibration is also a problem that must be considered and solved. Here are five steps to solve:

First, first check the horizon, often say that the building is not stable depends on the foundation well is not good? Machine tools are the same, if the ground screw level is not good, it will cause the resonance machine.

Secondly, if the above action is taken, the vibration is still not eliminated. We should check whether the surface is terrazzo or the floorboards are relatively strong due to the empty floor. If the floor is flat, the ground is empty Cause resonance, encountered this situation how to deal with it? Do not worry, go to the rubber hardware store to buy a few pieces of black rubber pads, the thickness of 6-10 mm, the size of 10 cm and the size of the foot pad slightly larger on the line, loosen the ground screws, the mat rubber mat at the level of feet Under the pad, you can play a great shock absorption function.

Third, if after the above action, the vibration has not been eliminated, we must check the grinder sand wheel and fixed wheel flange problems.

The fourth is the processing environment, precision surface grinder near the same workplace is impossible to place such as punch, lathe and other vibration of the larger machine, easy to cause resonance, how to judge, it is simple, you just stop the grinder, start the punch or Lathe, if the hand to touch the grinding machine vibration or Ma hand feeling is affected. Treatment is to place the workshop.

Fifth, if the above series of actions still failed to eliminate the vibration that may not be able to handle your area, it may be longer grinding spindle time itself shocks, which bearings or motor is broken, it may be the machine structure And assembly problems, we must inform the manufacturers to deal with